Garment GUI

Use Case #40 · Cluster E · Field Work, Studio Crafts & Craft Beverage · All 50 Modes

Home-Brewer & Espresso Barista Boil / Shot Extraction Fuse

Wear the $199 Garment GUI LED & Touch Sleeve on your brewing forearm: it tracks 60-minute hop boil additions (CITRA 1OZ IN 04:12) and a 28-second espresso pull bar, through wet hands and hot kettles.

  • Counts hop additions for you: Start the boil and the sleeve scrolls the next addition with a live countdown on the 8×32 matrix.
  • Wet-hands friendly: Tap a fabric pad instead of a splashed counter phone; the LED pod slides out for cold-water washing.
  • Ships as 1 of 50 modes: Pre-loaded as Dual Process Fuse; set your own hop schedule or shot time in Sleeve Studio.

Preorder Sleeve · $199 Free US Shipping Try in Sleeve Studio →

▶ See the 8×32 Forearm Display in Action

Watch the 8×32 RGB LED matrix and 5 conductive-fabric touch pads running timers, kitchen, focus, health and work modes on the forearm sleeve. Concept render · simulated 8×32 display · first production run of 500 units.

Why Phone, Watch, and Tablet Screens Fail at Timing Hop Additions and Espresso Shots

What Each Forearm Pad Does (Pads 1–5)

Pad 1 (Elbow)Single tap — Start / reset the 60-minute hop boil timer · LED cue: BOIL 60:00
Pad 2 (Upper Mid)Double tap — Log the hop addition now · LED cue: CITRA 1OZ ✓
Pad 3 (Center)Swipe — Cycle hops (Citra / Mosaic / Simcoe) · LED cue: HOP: MOSAIC
Pad 4 (Lower Mid)Press & hold — Start the 28-second espresso pull bar · LED cue: Green bar SHOT 0:28
Pad 5 (Wrist)Single tap — Show the next hop addition countdown · LED cue: CITRA 1OZ IN 04:12

Customize in 30 seconds: Pick this mode in the Sleeve Studio app, type or speak new text, colors, or pad actions, and tap Send over Bluetooth — no code, no wiring.

Frequently Asked Questions

Can it track a full 60-minute hop schedule?
Yes. Tap Pad 1 to start the boil and the sleeve counts each addition, showing CITRA 1OZ IN 04:12 until it is time to drop the hops.
Can it time a 28-second espresso shot?
Hold Pad 4 to start a green extraction bar that runs the full 28-second window to 2 oz.
Will steam or wort splash hurt it?
The sealed 8×32 LED and BLE module sit in an inner pocket; unsnap it and hand-wash the sleeve in cold water after brew day.

Run This Mode on Your Forearm — Reserve Batch 01 ($199)

  • Complete hardware + 50 modes ($199): 8×32 RGB LED matrix (256 pixels), 5 sewn conductive-fabric touch pads, and a 5-second slide-out washable electronics pod.
  • Sleeve Studio app ships first: Personalize all 50 modes in plain words before your sleeve arrives (small monthly subscription; no code).
  • Zero-risk preorder: First run of 500 units (~30 days to production), free US shipping, 100% refund anytime before shipping plus a 90-day money-back guarantee.

Preorder Sleeve · $199 Free US Shipping Open Sleeve Studio Full Hardware Specs

Watch → Prove → Buy

Not ready to order yet? Take the next step.

See the hardware in motion, read the peer-reviewed textile research behind it, or reserve your spot in the first production run of 500 sleeves.

90-day money-back guarantee, plus a full refund any time before the sleeve ships.

Not ready to pay? We'll email you build milestones and shipping dates.

Questions about your setup? Call +1 725-338-4835 or email alex@midnightdev.dev.